参数 | 数据 | 说明 |
---|---|---|
Shaft Size | 2.362 in | |
Shaft Size | 60 mm | |
Shaft Size Type | Metric | |
Weight | 23 lb | |
UPC Code | 053893775470 | |
Dimension B | 4 in | |
Dimension L | 10-1/2 in | |
Dimension A | 2-7/8 in | |
Dimension J Min. | 8-3/8 in | |
Dimension J Max. | 8-5/8 in | |
Bolt Diameter | 5/8 in | |
Dimension N | 3/4 in | |
Dimension N1 | 7/8 in | |
Dimension H1 | 1-5/8 in | |
Dimension H2 | 5-23/32 in | |
Dimension d1 | 4-1/16 in | |
Dimension H | 2-3/4 in | |
e | 0.40 | |
X (if Fa/Fr ≤ e) | 0.87 | |
Y (if Fa/Fr ≤ e) | 2.17 | |
X (if Fa/Fr > e) | 0.7 | |
Y (if Fa/Fr > e) | 2.63 | |
K Factor | 1.51 | |
C90 Dynamic Load Rating | 11600 lb | C90 is the Dynamic Load Rating based on a rated Life of 90 million revolutions (3000 hrs at 500 RPM). |
C0 Static Load Rating | 54000 lb | |
Fa-max Maximum Permissible Thrust Load | 3454 lb | Fa-max is based on the limits of the holding force of two properly tightened collars and set screws. Fifty percent of the values should be used when a single collar is installed. |
Fr-max Maximum Allowable Slip Fit Radial Load | 9500 lb | If the application loads approach or exceed Fr-max, the shaft fit should be adjusted to a line-to-line (g6 or h6) or light press fit (m6). |
Max. Speed | 2420 rpm | Timken Double Lip Seal |